某混合铜矿选矿试验研究
Experimental Research on the Beneficiation Technology for Separating a Mixed copper ore
投稿时间:2015-07-09  修订日期:2015-08-03
DOI:
中文关键词:  混合铜矿  优先浮选  工艺流程  药剂制度
英文关键词:Mixed copper ore  Preferential flotation  Technical flowsheets  reagent system
基金项目:
作者单位E-mail
王显强 昆明理工大学 w562099116@163.com 
戈保梁 昆明理工大学 411977506@qq.com 
摘要点击次数: 418
全文下载次数: 175
中文摘要:
      四川某铜矿含Cu0.77%,Ag8.2g/t,铜矿物以辉铜矿等硫化铜为主,氧化铜矿物主要为孔雀石,氧化率为16.88%,其中结合氧化铜占10.39%,属于低品位混合铜矿。针对矿石性质,确定了优先浮选硫化矿再浮选氧化矿的浮选工艺。在适宜的磨矿细度和药剂制度下,采用一段磨矿,两次粗选,一次精选,一次扫选的闭路试验流程,最终取得了铜精矿品位为25.76%,回收率为85.74%,含Ag258.21g/t的指标。
英文摘要:
      The grade of Cu taken from Sichuan mixed copper ore is 0.77%, Ag8.2g/t, copper minerals mainly contain copper sulfide, such as chalcocite and so on, copper oxide minerals is mainly malachites, the oxidation rate of the copper is 16.88%, the combined copper oxide accounts for 10.39%, and the mixed copper ore is a low grade. According to the characteristics of the ore, the article conducts the copper sulfide flotation firstly, and then conducts the copper oxide flotation. Under the conditions of appropriate grinding and reagent system, the technical flowsheet of the closed-circuit tests is a period of grinding, twice roughing, once cleaning, and once scavenging. A copper concentrate containing Cu 25.76% with recovery rate of 85.74% including Ag 258.21g/t can be finally obtained.
查看全文  查看/发表评论  下载PDF阅读器
关闭
版权所有:矿产综合利用
地址:四川省成都市二环路南三段五号   邮政编码:610041
电话:028-85592322  Email:kczl@chinajuornal.net.cn;kczhly@163.com
技术支持:北京勤云科技发展有限公司